A potato grading line does more than divide a crop into size bands. Mechanical separation, optical quality inspection and transfers between machines each affect the final result, and each needs its own performance check.
Separate the jobs before comparing the machines
Public technical documentation from Bijlsma Hercules and Flikweert Vision provides a basis for comparing size separation and optical quality inspection. This article examines those distinct functions alongside university guidance on handling damage. It does not identify a customer installation, announce a commissioning date or claim independently measured performance for an entire line.
The manufacturer’s BSM 2113 technical page describes a sieve grader with adjustable movement: product is transported across the sieves and given time to fall through the relevant openings. The five-deck version is a size-separation component. Its published capacity is a manufacturer specification for that machine, not a demonstrated rate for every crop or for a complete packing line.
Weekdays. Unsubscribe in one click.
The practical question is what the business needs each size stream to do next. A size band may move directly into a box or wait in a bunker before further inspection. Those choices affect how a batch is routed and how equipment is used. The purchasing comparison should therefore describe the intended flow of material, rather than treating every sorting task as interchangeable.
Optical quality is a different decision
Flikweert Vision’s explanation of QualityGrader economics, dated 20 July 2026, describes industrial cameras and algorithms evaluating individual potatoes or onions against selected criteria. The company identifies labour use, consistency, unnecessary rejection and usable output as contributors to value. These are supplier claims about the factors that can matter; they do not establish a standard payback period for another business.
An evaluation should examine both the accepted product and the rejected stream. If acceptable potatoes are discarded, a low defect count at the final outlet can hide lost saleable volume. If settings are too permissive, the business may deliver defects to the buyer. The useful comparison is the performance of the whole decision process on representative lots, with the buyer’s actual requirements made explicit.
A sound inspection result cannot undo impact damage
Colorado State University’s peer-reviewed blackspot guidance explains that mechanical stress during harvest and handling can damage internal tissue without breaking the skin. Discolouration may take 24–48 hours to appear. A potato that looks sound immediately after a transfer can therefore reveal damage later.
The same source calls for evaluating the stages of harvesting, storing, packing and shipping, and identifies staff training as part of bruise prevention. For a grading-line review, that means looking beyond the inspection unit to the transfers around it. Quality control and damage prevention are connected tasks, but a camera’s acceptance decision should not be mistaken for proof that the preceding handling was harmless.
Measure the business outcome
A useful commissioning record would keep the input lot, operating settings, size outputs, accepted and rejected fractions, stoppages and subsequent quality checks together. This is an editorial assessment of what a meaningful comparison requires, not a performance result from the installation described in the supplied post. The aim is to compare like with like and understand where saleable volume is gained or lost.
The same discipline applies to throughput. A component’s rated capacity is one input to planning. The final question is how much conforming product the line delivers under the farm or packer’s conditions, while maintaining the quality required at the destination.
Sources
Bijlsma Hercules, BSM 2113 technical page; Flikweert Vision, QualityGrader payback discussion, 20 July 2026; CSU Extension, Blackspot Bruise in Potatoes, June 2019. Sources checked on 17 November 2026.
Cover: AI-generated editorial illustration; it does not depict a specific facility, field or machine.


